Georgia's First Choice for Metal Fabrication

Trusted to fabricate the highest grade metal parts for companies in the great state of Georgia, Thieman Manufacturing Technologies provides expert machining and metal fabricating options to fit diverse industry needs. With 24 acres of fenced/secured storage and a 70,000 Sq. ft manufacturing building, our work with CNC Machining Services and Metal Fabrication Services have gone unmatched. Our work has been established as proven solutions that increase the performance, precision, and reliability of each component manufactured. 

For over 20 years, TMT has set the standard for high-quality fabrication. It’s been a mission of ours to deliver exceptional results through proven techniques, flawless execution, top technologies, and superior materials. When you work with us, you can guarantee rapid results and reliable outcomes. 

Expert Machining Capabilities

At TMT Fab, we make sure that every component meets the needed requirements & demands of any industry we work with in the state of Georgia. Whether you need parts or prototypes made from Stainless Steel, Carbon Steel, Aluminum, or Copper we have you covered. With top of the line machinery and a secure fenced in 24 acre facility, you can guarantee nothing short of excellence. 

4000 Watt Trumpf Laser – 3/4” carbon steel – 3/8” Stainless – 5/16” Aluminum – (60” x 120” tables)

5000 Watt Trumpf Laser – 1” carbon steel – 1/2″ Stainless – 1/2″ Aluminum – (60 x 120 tables)

260 Watt MG Metal Master Plus High Definition Plasma – 1 1/2” carbon steel – (72” x 240” tables)

Nisshinbo HIQ 1250 Hydraulic Turret Punch Press

Trumpf Trumatic 2020 Punch

175 Ton and 250 Ton Wysong Press Brakes – 12’ bed with 24” & 48” CNC back gauging

90 Ton Trumpf TRUMABEND V855 Press Brake – CNC 6 Axis back gauge

Trumpf Trubend 7036 Press Brake

3/8” x 6’ Plate Roll

Sharp Vertical Mill – 2-Axis Digital Readout, Power feed, 1’ x 50” table

Haas VF3 Machining Center

Hem Cut-off saw

Burco Fixture Tables

Welding (Mig and Tig) – Spot Welders – OTC Daihen AX-V6L Long Reach Arc Welding Robot

Pem-Serter

Multi-Spindle and Radial Arm Drill Presses

Hand Plasma Cutter

Stud Gun (3/8 x 1-1/2 capacity)

95 ton Iron Worker – punch, shear, trim

Parts Washer – 48” diameter x 72”

Liquid Paint Booth – 40’ x 16’ Side-Down Draft

Wheelabrator Shot Blaster – 96” diameter table

Assembly operations available

Just Some Of What We’ve Produced

Previous
Next

An Array of High-Grade Metal Finishes

A standard finish is minimal, and is left with a raw-form metal.

Also called “Bead Blasting,” this finish creates a smooth matte appearance on metals.

Powder coating is a painting process where powdered paint is sprayed on a part or application prior to heating. The result is a strong layer that is more resistant to wear and corrosion.

This process also allows for a wide selection of colors for the further  customization of color.

 

This layer of zinc coating provides protection from corrosion.

Also known as Chem Film or Chemical Conversion Coating, this metal coating provides corrosion resistance and conductive properties. This coat may also be used as a base for painted or color finishes.

 

This three-step process coats fabricated metals in a bath of molten zinc, protecting it from corrosion.

A process that alters the physical and chemical properties of a metal, by heating it or cooling it to extreme temperatures to make the material harder or softer. 

Using a pump, spray, or pressurized vessel, liquid paint is evenly applied to a part or application.

This dipping (immersion) process uses organic paint particles, where the paint based finish is able to stick on a metal surface with the help of electrical currents. 

If a custom finish is required for an order, or the finish is not listed on our site, please include this information when requesting a quote. We can likely still complete the project. 

Why Industries All Over Georgia Choose Us

– Durable Metal-

Our metal fabrication process produces highly durable and precision cut parts and prototypes .

– Fast Turnaround –

Our turnaround for fabricated parts are often processed and completed within just 2-3 weeks of an order.

– Material Variety –

Our metal fabrication services combine many options, ranging from the type of metal, it strength, finish, and durability.

– Scalable Manufacturing –

Our parts are manufactured on-demand, and our process allow us to effectively create 1 prototype or 1000s of parts.

Proudly Producing Durable Metal Parts For All 50 States
  • Alabama
  • Alaska
  • Arizona
  • Arkansas
  • California
  • Colorado
  • Connecticut
  • Delaware
  • Florida
  • Georgia
  • Hawaii
  • Idaho
  • Illinois
  • Indiana
  • Iowa
  • Kansas
  • Kentucky
  • Louisiana
  • Maine
  • Maryland
  • Massachusetts
  • Michigan
  • Minnesota
  • Mississippi
  • Missouri
  • Montana
  • Nebraska
  • Nevada
  • New Hampshire
  • New Jersey
  • New Mexico
  • New York
  • North Carolina
  • North Dakota
  • Ohio
  • Oklahoma
  • Oregon
  • Pennsylvania
  • Rhode Island
  • South Carolina
  • South Dakota
  • Tennessee
  • Texas
  • Utah
  • Vermont
  • Virginia
  • Washington
  • West Virginia
  • Wisconsin
  • Wyoming

Let’s Get Started On Your Next Project

Give us a call to discuss your fabrication needs or upload your CAD files to get a same-day quote and get started on your next project today